| 1 |
Author(s):
Ashok Purohit, Agam Fadia, Preet Jain, Varad Raut.
Page No : 1-4
|
Effect of Dynamic Loads on G+15 RCC Residential Building
Abstract
Any structure is subjected to dynamic loading. Structural dynamics is especially used in analysis of dynamic structures under different loading conditions. It is very important to know the effect of dynamic loads for structural engineers in the design field. This paper is helpful to understanding about effects of dynamic loads on RCC structure and to establish continuity of structure. In this discussed about dynamic loads subjected to the RCC structure and Also to know the importance of the dynamic analysis of the structure. This paper is very helpful to gaining knowledge in structural dynamics for students, structural designers and lecturers also. This paper is also gives the general importance of structural dynamics and also give some of importance overview to the students and all.
| 2 |
Author(s):
Dr S.S Morade , Vaishnavi Dhundale , Prachi Jaiswal , & Ankita Rajguru.
Page No : 1-5
|
DESIGN OF INTELLIGENT HELMET FOR COAL MINERS
Abstract
A smart helmet has been developed that is able to detect of hazardous events in the mines industry. In the development of helmet, we have considered the three main types of hazard such as air quality, helmet removal, and collision (miners are struck by an object). The first is the concentration level of the hazardous gases such as CO, SO2, NO2, DHT temperature and Humidity and particulate matter. The second hazardous event was classified as a miner removing the mining helmet off their head. The layout of the visualisation software was completed, however the implementation was unsuccessful. Tests were successfully done to calibrate the accelerometer. PCB’s that were designed and made included a breakout board and a prototype board. A whole software implementation was done based on Eagle of the measuring of sensors and of calculations done with the measured values. This paper presents the undertaken design detailing solutions to issues raised in previous research.
| 3 |
Author(s):
Tejas Sonawane1, Darshan Shelar2, Shubhangi Kate3 & Prof.Yogesh.R.Patni.
Page No : 1-5
|
A REVIEW- AUTO TEMPERATURE DETECTOR FOR ENTRANCE FOR COVID SAFETY
Abstract
In response to COVID19 pandemic outbreak, there is a need for a temperature check-up of the visitors to detect fever before they enter the city via the airports, railway stations and even at the highway tolls. There is a need for thermal screening in shopping malls, multiplex, supermarket and various other places before granting access to the visitors. There is a risk of cross infection in manual testing. The MLX90614 is a high-performance Infrared Temperature Sensor that can be used to automatically make a temperature check-up and decide whether to grant the door access. This paper is comprised of mainly the three subsystems: namely Human Presence Detection System, Temperature Measurement System and automatic door access control with display.
| 4 |
Author(s):
Suraj M Marchande.
Page No : 1-5
|
Comparative Analysis For With And Without Elastomeric Base Isolated Structure Using E-Tabs
Abstract
Abstract - Base isolation method is one of the passive seismic isolation systems commonly used in earthquake prone areas. Over the past several decades, base isolation has been considered for structures like buildings and bridges subjected to earthquake ground motion. The fundamental principle of base isolation is to modify the response of the building so that the ground can move below the building without transmitting these motions into the building. In this project, analysis is performed on RC residential building. The design and analysis of building is done using computer program ETABS. The performance of the considered building with and without base isolator is studied. The main objective is to compare efficiency of fixed base and isolated base building. The rubber bearings are used as a base isolation system.
| 5 |
Author(s):
bhagyashri bhavsar.
Page No : 1-5
|
SMART SHOPPING CART
Abstract
A shopping mall is a place where wide varieties of items are available. Many shopping malls use barcode scanning system. As this system is time consuming, people have to wait in a long queue at the billing counter. To overcome this problem, smart shopping cart is introduced. This proposed system uses RFID technology. Every product is attached with Radio Frequency Identification (RFID) tag. For scanning this tag RFID reader is used which is attached to the cart. As a result bill is generated in the cart itself and is displayed on the LCD which saves the time of the customer
| 6 |
Author(s):
Sushrut Joshi , Yash Kothari, Gaurav Lagad, Yash Patil, Ashok Meti .
Page No : 1-5
|
Analysis of Property Valuation for Residential Building
Abstract
In this paper we have studied the actual concept of valuation. How Valuation plays a vital role in the field of Civil Engineering and Construction Industry. We have calculated the cost of construction for various locations such as Goregaon, Virar, Dahanu and compared the cost of construction in above mentioned locations with help of different parameters.
| 7 |
Author(s):
VISHAL DINKAR TRIBHUWAN.
Page No : 1-5
|
A STUDY OF AGRICULTURAL LOAN FOR AXIS BANK LTD SHIRDI
Abstract
A Study of Agricultural Loan for Axis Bank ltd”. The Branch head of the Axis Bank Shirdi Branch Pvt. Ltd is to Mr. Avinash Labade sir who has all information Provide about the Bank & Agricultural Loan. And my subject topic is a study Agricultural Loan for Axis Bank.ltd In the Bank there are various produce i.e. crop Loan, Export finance, kisan credit card and other short term loan etc. and various products and services offered agricultural loan I have collected primary and secondary data from financial statement of Bank and discussion with various staff member in Bank. And the feedback the farmers who have borrowed loan from axis bank.
| 8 |
Author(s):
1. DR. S. K. NAYAK, 2. DR. JASWINDER.
Page No : 1-6
|
THE UNSPOKEN CONSEQUENCES OF CHILD MARRIAGE AND ADOLOSCENT PREGNANCY
Abstract
In India, Marriage is considered as one of the most important social institutions through which society perpetuates as it is a means of establishing family relations. This social institution is expressed in many forms of rituals and ceremonies. Child marriage is a major sociological problem that has persisted for centuries in India, more so in Northern States. In India, around 45 percent of the girls are wedded below 18 years of age. Majority girls who are married before 18 years of age are from poor families. Most of the girls use to face problems like domestic violence, teen pregnancy problems. The age group under 18 years has a high fertility. When a young girl becomes sexually mature, she is married off and is expected to accomplish what she was biologically designed for i.e giving birth. Teenage pregnancy is the occurrence of pregnancy in females under the age of twenty. Sometimes, even pre-teen females can become pregnant, as reported in various instances. With Modernization, while teenage pregnancy rate is rapidly declining in developed countries, it is still high in developing countries like India. This paper explains both the concepts of child marriage and teenage pregnancy.
| 9 |
Author(s):
sarang dhake.
Page No : 1-6
|
AIR AND SOUND POLLUTION MONITORING SYSTEM BY USING IOT
Abstract
The growing of air and sound pollution is one of the major issues faced by people these days. Therefore, it is necessary to monitor air quality as well as sound pollution and keep it under control for a better future and healthy living for all. So, we’ve proposed an air and sound pollution monitoring system that allows us to monitor and check air quality as well as sound pollution in a particular area through Internet of Things. This system works on the methods of IOT which is a rising technology based on the fusion of electronics and computer science. The monitored data can be obtained from remote location without actually visiting it due to the access of internet. System uses gas as well as noise sensors to sense presence of harmful gases and sound in the air and constantly transmit this data to microcontroller. The sensors interact with microcontroller which processes this data and transmits it over internet. This allows authorities to monitor air and noise pollution in different areas. Therefore, through this system any authority can keep watch on the noise pollution near schools, hospitals etc, and if system detects air quality and noise issues it alerts authorities so they can take measures to control the issue. This project can be used to reduce the pollution which may affect the environment.
| 10 |
Author(s):
YASH M. JAIN.
Page No : 1-7
|
Design of Agro Waste Bricks for Tribal Regions
Abstract
Agro waste which is increasing day by day becomes eyesore and in turn pollutes the environment, especially in villages where no waste disposal system exists. A large amount of agro waste is being generated into the tribal regions are discarded or burned which leads to the contamination of environment and air. Hence, these waste are to be effectively utilized. Agro Waste are added with soil at particular percentages to obtain high strength bricks that possess thermal and sound insulation properties to control pollution and to reduce the overall cost of construction; this is one of the best ways to avoid the accumulation of agro waste. The agro waste is naturally generated in surplus quantity and hence the cost factor comes down. Hence in this thesis, an attempt is made to study regard the properties of the brick which is manufactured using agro wastes. The present work deals with the manufacturing and analysis of bricks made with waste and soil. The bricks produced are light weight, have smooth surface and fine edges, do not have cracks and have high crushing strength and very low water absorption.
| 11 |
Author(s):
Bhole Abhedya .
Page No : 1-7
|
Crime Analysis and Prediction Using Data
Abstract
In this era of recent times, crime has become an evident way of making people and society under trouble. An increasing crime factor leads to an imbalance in the constituency of a country. In order to analyse and have a response ahead this type of criminal activities, it is necessary to understand the crime patterns. This study imposes one such crime pattern analysis by using crime data obtained from Kaggle open source which in turn used for the prediction of most recently occurring crimes. The major aspect of this project is to estimate which type of crime contributes the most along with time period and location where it has happened. Some machine learning algorithms such as Naïve Bayes is implied in this work in order to classify among various crime patterns and the accuracy achieved was comparatively high when compared to pre- composed works.
| 12 |
Author(s):
Pratik Chavhan, Anuraj Patil, Omkar Patil , Divyanshu Thakare.
Page No : 1-8
|
Automatic Power Factor Detection And Correction using Aurdino
Abstract
This project is mainly proposed for reducing the power loss in industries by using power factor compensation through a number of shunt capacitors. Power factor is defined as the ratio of real power to apparent power. So, the increase in reactive power (real power) increases the apparent power , so the power factor also decreases. By having low power factor
the industry needs more energy to meet its demand, so the efficiency decreases. In this system
we proposed the time lag between zero voltage pulse and zero current pulse delay generated by suitable op-amp circuits in comparator mode and fed into two interrupt pins in microcontroller. Microcontroller displays the power loss due to inductive load on the LCD. This process is continuously actuate until the power loss would be zero by using relays which is used to bring the shunt capacitors into load circuit. 8-bit microcontroller is used in this project which belongs to AVR family.
| 13 |
Author(s):
Sanket P1, Adarsh C2, Kirtesh S3, Mangesh S4, Pravin Nemade5, Manoj Patil6, Kaveri Sonawane7.
Page No : 1-10
|
DESIGN OF WATER TREATMENT PLANT FOR DINDORI TALUKA BY KOMVEE SOFTWARE
Abstract
Water is the prime most factors which holds life on earth. The availability of water varies among different places. In some places the quality and quantity of water obtained is not satisfactory. Due to population explosion water demand increased to its peak limit which in turn lead to scarcity of water. Many of the places in Kerala are seriously affected by these problem due to lack of an efficient water supply system. Careful examination of water sources and proper treatment of water with an efficient water supply system can overcome these problems to a great extent. In this project we have planned to design an efficient water treatment plant which makes the water useful for drinking purpose. This project deals with the design of various components of water treatment plant at Peelarmozhi , Chalakudy. The water from Kappathodu canal is directed to the pond near the site by constructing a weir across the canal and the water undergoes proper treatment before it is dispatched.
| 14 |
Author(s):
Vighnesh Gajula, Kunal Khadke, Pratik Kokate, Bhushan Sonkamble.
Page No : 1-10
|
IOT Based Smart Interactive Talking Plant
Abstract
The aim of this work is to bring the Artificial Intelligent (AI) concept in a new level by introducing it to living organisms like plants. In this system we provide a concrete scenario where an augmented plant, an E-Plant can be incorporated in a ubiquitous computing environment in order to work together with other augmented objects, artifacts, in order to provide to the environment status of its condition. The IoT is the addition of Internet connectivity into physical devices and everyday objects. Embedded with electronics, Internet connectivity, and other forms of hardware (like sensors), these devices can interact with others over the Internet, and they can be remotely examined and controlled.